Eaton HCM1A2213V2-750-R 75 uH Shielded Automotive Inductor
Eaton HCM1A2213V2-750-R 75 uH Shielded Automotive Inductor

Eaton HCM1A2213V2-750-R 75 uH Shielded Automotive Inductor

Share
Eaton HCM1A2213V2-750-R: AEC-Q200 automotive power inductor, 75 uH ±20%, 7.5 A Irms, Isat 10 A, DCR 27.6 mOhm, 22.78 x 22.3 mm.
    • Product Details
    • Download

    Eaton HCM1A2213V2-750-R 75 uH Shielded Automotive Inductor

    HCM1A2213V2-750-R at a glance: AEC-Q200 automotive power inductor, 75 uH ±20%, 7.5 A Irms, Isat 10 A (20% rolloff @ +25 °C), DCR 27.6 mOhm, 22.78 x 22.3 mm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberHCM1A2213V2-750-R
    OCL (open circuit inductance)75 uH ±20%
    FLL minimum, at Isat48 uH
    Irms (DC, 40 °C rise)7.5 A
    Isat (20% rolloff @ +25 °C)10 A
    DCR typical @ +20 °C27.6 mOhm
    DCR maximum @ +20 °C32.5 mOhm
    SRF typical2 MHz
    K-factor (Bp-p = K x L x dI)6, Bp-p in Gauss
    Package22.78 x 22.3 mm
    Height13.0 mm
    MountingSurface mount
    Operating temperature-55 °C to +155 °C (ambient plus self-heating)
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10907

    Outline Drawing

    HCM1A2213V2-750-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10907: outline with
    rated mm dimensions, recommended pad layout and winding schematic. Tolerances are stated on
    the drawing itself.

    What the Numbers Mean

    AEC-Q200 qualified, molded, magnetically shielded, and rated to +155 °C ambient plus self-heating. The automotive grading is not a label on a commercial part: the test regime covers thermal shock, vibration and moisture, and the data sheet quotes the parameters at the temperature extremes the qualification demands.

    At the rated 7.5 A the winding dissipates about 1.55 W in copper alone, using the typical DCR of 27.6 mOhm. That figure is the floor of the loss budget: it assumes the current is pure DC, and any ripple adds to it.

    Isat is specified as 20% rolloff @ +25 °C, so the number is a rolloff criterion rather than an absolute maximum. The useful working range extends a little beyond it on a soft saturation core, but the loop compensation has to be designed for the inductance that remains.

    Energy storage at the saturation current is around 3,750 uJ, the number that connects the inductance and the current rating into a single transient figure.

    K-factor 6 means the flux swing is about 450 Gauss per amp of ripple. Core loss scales with the flux amplitude and the frequency, so this is the number to carry into the loss calculation rather than the inductance alone.

    Self-resonant frequency is 2 MHz typical. Above that the part becomes capacitive and stops behaving as an inductor, which is why the switching frequency and its first harmonics should stay well below it.

    Where This Series Fits

    The HCM1A family is the automotive molded range: AEC-Q200 qualified, rated to +155 °C, from a 5 mm footprint up to a 22 mm body. Several sizes carry a V2 or V3 revision with a higher current rating or an extra saturation column, so the revision letter is part of the specification.

    Within the HCM1A2213V2 family this is value 12 of 14, in a range that runs from 0.47 uH to 100 uH.

    Compared with its neighbours in the table, HCM1A2213V2-820-R trades 3 A of rated current for the next inductance step, which is the usual compromise in this family.

    • Core material: alloy powder core, 22.78 x 22.3 mm body at 13.0 mm.
    • Typical applications: body electronics; central body control module; headlamps, tail lamps and interior lighting and led lighting; heating ventilation and air conditioning controllers (hvac); doors, window lift and seat control; advanced driver assistance systems.
    • The +155 °C rating is ambient plus self-temperature rise. Derate against the hot DCR, not the +20 °C value, when the board sits in a warm enclosure.

    Sizing and Layout Notes

    Copper resistance rises with temperature, so at the +155 °C limit the maximum DCR of 32.5 mOhm becomes roughly 49.7 mOhm. That is the figure to put into a hot-enclosure loss calculation; the +20 °C column is a bench number.

    Design note: the revision letter changes the electrical row. V2 and V3 parts of the same body size are not drop-in substitutes for the base part; compare the tables row by row.

    • Verify the qualification and the mounting process match the assembly line.
    • Verify the qualification and the mounting process match the assembly line.
    • Confirm the qualification file covers the module-level test plan.

    Frequently Asked Questions

    Is the part shielded for ADAS modules?
    The molded powder core encloses the winding, so the radiated field is small. That is why the family is used next to sensor front ends and camera interfaces.

    What is the operating temperature range?
    The rated range is quoted as ambient plus self-temperature rise, up to the maximum shown in the table. The part is qualified across that span, but the hot corner is where saturation and DCR must be checked.

    What is the self-resonant frequency used for?
    It marks the point where the winding capacitance dominates. Keep the switching frequency and the harmonics that carry energy below it, and use it to compare candidates of the same inductance.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products