Eaton HCM1A4020V3-150-R AEC-Q200 Inductor 15 uH, Isat 1.8 A
Eaton HCM1A4020V3-150-R AEC-Q200 Inductor 15 uH, Isat 1.8 A

Eaton HCM1A4020V3-150-R AEC-Q200 Inductor 15 uH, Isat 1.8 A

Share
Eaton HCM1A4020V3-150-R: AEC-Q200 automotive power inductor, 15 uH ±20%, 1.4 A Irms, Isat 1.8 A, DCR 320 mOhm, 4.75 x 4.45 mm.
    • Product Details
    • Download

    Eaton HCM1A4020V3-150-R AEC-Q200 Inductor 15 uH, Isat 1.8 A

    HCM1A4020V3-150-R at a glance: AEC-Q200 automotive power inductor, 15 uH ±20%, 1.4 A Irms, Isat 1.8 A (20% rolloff @ +25 °C), DCR 320 mOhm, 4.75 x 4.45 mm.

    Specification Table

    ParameterValue
    Orderable part numberHCM1A4020V3-150-R
    OCL (open circuit inductance)15 uH ±20%
    FLL minimum, at Isat8.4 uH
    Irms (DC, 40 °C rise)1.4 A
    Isat (20% rolloff @ +25 °C)1.8 A
    DCR typical @ +20 °C320 mOhm
    DCR maximum @ +20 °C384 mOhm
    SRF typical14 MHz
    K-factor (Bp-p = K x L x dI)449, Bp-p in Gauss
    Package4.75 x 4.45 mm
    Height2.0 mm
    MountingSurface mount
    Operating temperature-55 °C to +155 °C (ambient plus self-heating)
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1495

    Dimensions and Pad Layout

    HCM1A4020V3-150-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1495: outline with
    rated mm dimensions, recommended pad layout and winding schematic. Tolerances are stated on
    the drawing itself.

    What the Numbers Mean

    AEC-Q200 qualified, molded, magnetically shielded, and rated to +155 °C ambient plus self-heating. The automotive grading is not a label on a commercial part: the test regime covers thermal shock, vibration and moisture, and the data sheet quotes the parameters at the temperature extremes the qualification demands.

    The DCR figure of 320 mOhm is what sets the efficiency: at 1.4 A the winding drops about 0.448 mV and dissipates 0.627 W. On a low-voltage rail that drop is a measurable fraction of the output, so the DCR column deserves as much attention as the inductance.

    Saturation is quoted as 20% rolloff @ +25 °C. At that point the inductance has fallen to the stated fraction of its nominal value – the part is not damaged there, it simply stops behaving like the inductance on the label. Design the peak current to stay inside that boundary with margin for tolerance.

    Energy storage at the saturation current is around 24.3 uJ, the number that connects the inductance and the current rating into a single transient figure.

    K-factor 449 means the flux swing is about 6,735 Gauss per amp of ripple. Core loss scales with the flux amplitude and the frequency, so this is the number to carry into the loss calculation rather than the inductance alone.

    Self-resonant frequency is 14 MHz typical. Above that the part becomes capacitive and stops behaving as an inductor, which is why the switching frequency and its first harmonics should stay well below it.

    Series Positioning

    The HCM1A family is the automotive molded range: AEC-Q200 qualified, rated to +155 °C, from a 5 mm footprint up to a 22 mm body. Several sizes carry a V2 or V3 revision with a higher current rating or an extra saturation column, so the revision letter is part of the specification.

    Within the HCM1A4020V3 family this is value 15 of 15, in a range that runs from 0.1 uH to 15 uH.

    Compared with its neighbours in the table, HCM1A4020V3-100-R trades 0 A of rated current for the next inductance step, which is the usual compromise in this family.

    • Core material: alloy powder core, 4.75 x 4.45 mm body at 2.0 mm.
    • Typical applications: body electronics; central body control module; vehicle access control system; headlamps, tail lamps and interior lighting and led lighting; heating ventilation and air conditioning controllers (hvac); doors, window lift and seat control.
    • The +155 °C rating is ambient plus self-temperature rise. Derate against the hot DCR, not the +20 °C value, when the board sits in a warm enclosure.

    Putting It to Work

    Copper resistance rises with temperature, so at the +155 °C limit the maximum DCR of 384 mOhm becomes roughly 588 mOhm. That is the figure to put into a hot-enclosure loss calculation; the +20 °C column is a bench number.

    Design note: the revision letter changes the electrical row. V2 and V3 parts of the same body size are not drop-in substitutes for the base part; compare the tables row by row.

    • Check the hot-corner saturation margin against the worst-case load step.
    • Verify the part marking for revision traceability in production.
    • Check the hot-corner saturation margin against the worst-case load step.

    Frequently Asked Questions

    Is the part shielded for ADAS modules?
    The molded powder core encloses the winding, so the radiated field is small. That is why the family is used next to sensor front ends and camera interfaces.

    What is the self-resonant frequency used for?
    It marks the point where the winding capacitance dominates. Keep the switching frequency and the harmonics that carry energy below it, and use it to compare candidates of the same inductance.

    What is the self-resonant frequency used for?
    It marks the point where the winding capacitance dominates. Keep the switching frequency and the harmonics that carry energy below it, and use it to compare candidates of the same inductance.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products