Eaton HFW1V2215H200K 20.0 uH High-Current Inductor
Eaton HFW1V2215H200K 20.0 uH High-Current Inductor

Eaton HFW1V2215H200K 20.0 uH High-Current Inductor

Share
HFW1V2215H200K: high-current power inductor, 20.0 uH, 9 A, Isat 19 A, DCR 14.3 mOhm.
    • Product Details
    • Download

    Eaton HFW1V2215H200K 20.0 uH High-Current Inductor

    HFW1V2215H200K at a glance: high-current power inductor, 20.0 uH, 9 A, Isat 19 A, DCR 14.3 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberHFW1V2215H200K
    Inductance20.0 uH ±20%
    DCR maximum @ +25 °C14.3 mOhm
    Irms (DC, 40 °C rise)9 A
    Isat19 A
    SRF typical6.4 MHz
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1331

    Mechanical Drawing

    HFW1V2215H200K mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1331: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    A shielded power inductor with a soft saturation curve: as the current rises the inductance droops rather than collapsing, so the regulator keeps control through a load transient. The molded body contains the field, which is why these parts can sit side by side on a multiphase rail without coupling into each other.

    At 9 A the winding dissipates about 1.16 W in copper, using the 14.3 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 19 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    Within the HFW1V2215H200K family this is value 1 of 1, in a range that runs from 20 to 20 uH.

    Where This Series Fits

    The power inductor family covers sub-microhenry to tens of microhenry at currents from a few amps to tens of amps, in shielded surface-mount bodies. The data sheet rows carry both typical and maximum DCR so the loss budget can be built either way.

    • DCR is quoted at +20 °C. Copper resistance rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: computing (pol/vrms); distributed power architectures; servers and workstations; lan / wan applications; game consoles.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three different numbers, three different checks.

    Frequently Asked Questions

    What is the difference between Irms and Isat?
    Irms is the DC current that produces the rated temperature rise. Isat is the peak current at which inductance has fallen by a defined percentage. A converter can run above Irms briefly but must stay inside Isat.

    What is the difference between Irms and Isat?
    Irms is the DC current that produces the rated temperature rise. Isat is the peak current at which inductance has fallen by a defined percentage. A converter can run above Irms briefly but must stay inside Isat.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough to place parts side by side on a multiphase rail.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products