Eaton HFW1V2818H4R7K 4.7 uH Shielded Inductor 61.2 mOhm
Eaton HFW1V2818H4R7K 4.7 uH Shielded Inductor 61.2 mOhm

Eaton HFW1V2818H4R7K 4.7 uH Shielded Inductor 61.2 mOhm

Share
HFW1V2818H4R7K: high-current power inductor, 4.7 uH, 26.5 A, Isat 28 A, DCR 61.2 mOhm.
    • Product Details
    • Download

    Eaton HFW1V2818H4R7K 4.7 uH Shielded Inductor 61.2 mOhm

    HFW1V2818H4R7K at a glance: high-current power inductor, 4.7 uH, 26.5 A, Isat 28 A, DCR 61.2 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberHFW1V2818H4R7K
    Inductance4.7 uH ±20%
    DCR maximum @ +25 °C61.2 mOhm
    Irms (DC, 40 °C rise)26.5 A
    Isat28 A
    SRF typical2.86 MHz
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1330

    Mechanical Drawing

    HFW1V2818H4R7K mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1330: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    Reading the Data Sheet

    Power inductors in this family are chosen on three numbers: inductance for the ripple, saturation current for the transient, and DCR for the loss. The data sheet gives all three against a defined test condition, which is what makes the row comparable with parts from other vendors.

    At 26.5 A the winding dissipates about 43 W in copper, using the 61.2 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 28 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    Within the HFW1V2818H4R7K family this is value 1 of 1, in a range that runs from 4.7 to 4.7 uH.

    Series Positioning

    The power inductor family covers sub-microhenry to tens of microhenry at currents from a few amps to tens of amps, in shielded surface-mount bodies. The data sheet rows carry both typical and maximum DCR so the loss budget can be built either way.

    • DCR is quoted at +20 °C. Copper resistance rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: computing (pol/vrms); distributed power architectures; servers and workstations; lan / wan applications; game consoles.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three different numbers, three different checks.

    Frequently Asked Questions

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough to place parts side by side on a multiphase rail.

    Why are there two DCR columns?
    Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough to place parts side by side on a multiphase rail.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message