
| Parameter | Value |
|---|---|
| Orderable part number | HPAL1V0530-100-R |
| Inductance | 10.0 uH ±20% |
| DCR maximum @ +25 °C | 110 mOhm |
| Irms (DC, 40 °C rise) | 3 A |
| Isat | 3.5 A |
| FLL minimum (at Isat) | 5.6 uH |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 11076 |

Drawing reproduced from Eaton Technical Data 11076: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
Power inductors in this family are chosen on three numbers: inductance for the ripple, saturation current for the transient, and DCR for the loss. The data sheet gives all three against a defined test condition, which is what makes the row comparable with parts from other vendors.
At 3 A the winding dissipates about 0.99 W in copper, using the 110 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.
Saturation is reached at 3.5 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.
Within the HPAL1V0530 family this is value 13 of 13, in a range that runs from 0.1 to 10 uH.
The power inductor family covers sub-microhenry to tens of microhenry at currents from a few amps to tens of amps, in shielded surface-mount bodies. The data sheet rows carry both typical and maximum DCR so the loss budget can be built either way.
Is the part shielded?
The molded body encloses the winding, so the external field is small enough to place parts side by side on a multiphase rail.
Is the part shielded?
The molded body encloses the winding, so the external field is small enough to place parts side by side on a multiphase rail.
What is the difference between Irms and Isat?
Irms is the DC current that produces the rated temperature rise. Isat is the peak current at which inductance has fallen by a defined percentage. A converter can run above Irms briefly but must stay inside Isat.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd