Eaton ICL150D20 1.5 Ohm 20 mm NTC Inrush Current Limiter
Eaton ICL150D20 1.5 Ohm 20 mm NTC Inrush Current Limiter

Eaton ICL150D20 1.5 Ohm 20 mm NTC Inrush Current Limiter

Share
pEaton ICL150D20 — NTC inrush current limiter, 1.5 Ω at 25 °C, 14 A steady./p
    • Product Details
    • Download

    Eaton ICL150D20 1.5 Ohm 20 mm NTC Inrush Current Limiter

    Built by Eaton, the ICL150D20 holds 1.5 ohm at 25 °C, passes up to 14 A steady, on a 20 mm disk.

    Technical Data

    ParameterRating
    ParameterValue
    Orderable part numberICL150D20BIM (5.0 mm pitch) / ICL150D20CIM (7.5 mm pitch)
    Zero-power resistance R251.5 Ohm at +25 C
    ToleranceM = plus/minus 20 %
    Max steady current14 A
    Beta (25/50)2750 K
    Max capacitance at 240 Vac1,200 uF
    Dissipation factor30 mW/C
    Thermal time constant100 s
    BodyD20 disk, epoxy sealed radial
    Operating temperature-40 C to +200 C
    EnvironmentalHalogen free, Pb-free

    Selection Notes

    • Limits capacitor and transformer inrush by dropping resistance as it heats.
    • It does not interrupt a fault — pair it with a fuse or breaker upstream.
    • Leave cooling time between power cycles so the disk returns to high resistance.
    • Resistance at 25 °C sets the cold-start limiting; the hot value is far lower.
    • A disk rated for a higher steady current runs cooler at the same load.
    • Beta value 2750 K describes how sharply resistance falls with temperature.
    • Continuous current must stay at or below 14 A or the disk self-heats.

    Typical Applications

    Engineers usually specify it for these duties:

    • EV
    • charging

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message