Welcome to our company!
Eaton ICL150D25 1.5 Ohm 25 mm NTC Inrush Current Limiter
Share
pEaton ICL150D25 — NTC inrush current limiter, 1.5 Ω at 25 °C, 17 A steady./p
- Product Details
- Download
Eaton ICL150D25 1.5 Ohm 25 mm NTC Inrush Current Limiter
Eaton ICL150D25 1.5 Ohm 25 mm NTC Inrush Current Limiter belongs to the Eaton range. It holds 1.5 ohm at 25 °C, passes up to 17 A steady, on a 25 mm disk.
Technical Data
| Parameter | Rating |
|---|---|
| Parameter | Value |
| Orderable part number | ICL150D25BIM (5.0 mm pitch) / ICL150D25CIM (7.5 mm pitch) |
| Zero-power resistance R25 | 1.5 Ohm at +25 C |
| Tolerance | M = plus/minus 20 % |
| Max steady current | 17 A |
| Beta (25/50) | 2800 K |
| Max capacitance at 240 Vac | 2,500 uF |
| Dissipation factor | 40 mW/C |
| Thermal time constant | 125 s |
| Body | D25 disk, epoxy sealed radial |
| Operating temperature | -40 C to +200 C |
| Environmental | Halogen free, Pb-free |
Design Notes
- Limits capacitor and transformer inrush by dropping resistance as it heats.
- It does not interrupt a fault — pair it with a fuse or breaker upstream.
- Leave cooling time between power cycles so the disk returns to high resistance.
- Resistance at 25 °C sets the cold-start limiting; the hot value is far lower.
- A disk rated for a higher steady current runs cooler at the same load.
- Beta value 2800 K describes how sharply resistance falls with temperature.
- Continuous current must stay at or below 17 A or the disk self-heats.
Where It Is Used
Typical places this thermistor turns up:
- EV
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
