Welcome to our company!
Eaton ICL300D11 3 Ohm 11 mm NTC Inrush Current Limiter
Share
pEaton ICL300D11 — NTC inrush current limiter, 3 Ω at 25 °C, 5.5 A steady./p
- Product Details
- Download
Eaton ICL300D11 3 Ohm 11 mm NTC Inrush Current Limiter
Built by Eaton, the ICL300D11 holds 3 ohm at 25 °C, passes up to 5.5 A steady, on a 11 mm disk.
Technical Data
| Parameter | Rating |
|---|---|
| Parameter | Value |
| Orderable part number | ICL300D11BIM (5.0 mm pitch) / ICL300D11CIM (7.5 mm pitch) |
| Zero-power resistance R25 | 3 Ohm at +25 C |
| Tolerance | M = plus/minus 20 % |
| Max steady current | 5.5 A |
| Beta (25/50) | 2650 K |
| Max capacitance at 240 Vac | 300 uF |
| Dissipation factor | 11 mW/C |
| Thermal time constant | 60 s |
| Body | D11 disk, epoxy sealed radial |
| Operating temperature | -40 C to +170 C |
| Environmental | Halogen free, Pb-free |
Selection Notes
- Limits capacitor and transformer inrush by dropping resistance as it heats.
- It does not interrupt a fault — pair it with a fuse or breaker upstream.
- Leave cooling time between power cycles so the disk returns to high resistance.
- Resistance at 25 °C sets the cold-start limiting; the hot value is far lower.
- A disk rated for a higher steady current runs cooler at the same load.
- Beta value 2650 K describes how sharply resistance falls with temperature.
- Continuous current must stay at or below 5.5 A or the disk self-heats.
Typical Applications
Engineers usually specify it for these duties:
- EV
- charging
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
