Eaton LAN2VSOS24351C2 Ethernet Isolation Transformer
Eaton LAN2VSOS24351C2 Ethernet Isolation Transformer

Eaton LAN2VSOS24351C2 Ethernet Isolation Transformer

Share
LAN2VSOS24351C2: LAN transformer, single port.
    • Product Details
    • Download

    Eaton LAN2VSOS24351C2 Ethernet Isolation Transformer

    LAN2VSOS24351C2 at a glance: LAN transformer, single port.

    Key Specifications

    ParameterValue
    Orderable part numberLAN2VSOS24351C2
    PortsSingle
    Pins24
    Leakage inductance0.5 uH
    DCR maximum1.2 Ohm
    Inter-winding capacitance35 pF
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +85 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1375

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data ELX1375; the package line above gives the body size where
    the data sheet states it.

    Reading the Data Sheet

    This is a toroid-wound LAN transformer on an open header: surface mount, one winding per pair, centre tap brought out. Inductance is quoted with a DC bias condition because the PHY drives a bias current through the winding.

    Within the LAN2VSOS24351C2 family this is item 1 of 1 in the Eaton catalogue.

    What This Family Is For

    The LAN range covers 100BASE-T through 10GBASE-T, single to quad port, with and without PoE, in open-header SMT packages.

    • The magnetics set the return loss and crosstalk floor of the link. A marginal part cannot be fixed in layout.
    • Typical applications: rj45 network interface card; ethernet switch, router; selv/elv equipment; smart tv; data centers.
    • Design note: insertion loss and return loss are band specifications. Compare curves at the band edges, not the typical number.

    Frequently Asked Questions

    Which port count do I need?
    One transformer per port. The single, dual and quad variants are the same magnetics repeated in one package, which is why the pin count scales with the port count.

    What does 1CT:1CT mean?
    Centre-tapped to centre-tapped, one to one. Ethernet PHYs are designed around this ratio, so a different ratio changes the impedance seen by the PHY and the link will not meet its return loss specification.

    What does 1CT:1CT mean?
    Centre-tapped to centre-tapped, one to one. Ethernet PHYs are designed around this ratio, so a different ratio changes the impedance seen by the PHY and the link will not meet its return loss specification.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message