
| Parameter | Value |
|---|---|
| Orderable part number | LD2-100-HV |
| Inductance | 10.0 uH ±20% |
| DCR maximum @ +25 °C | 60 mOhm |
| Isat | 2.5 A |
| FLL minimum (at Isat) | 6.4 uH |
| Impulse test voltage | 1100 V |
| Hi-pot test voltage | 1000 V |
| Mounting | Through-hole |
| Operating temperature | -25 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1200 |

Drawing reproduced from Eaton Technical Data ELX1200: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
Drum core parts are the workhorse radial and axial inductors: cheap, robust, and available in a wide value range. The data sheet row gives the rated current, the saturation current and the DC resistance, which is all a filter or a low-power converter needs.
Saturation is reached at 2.5 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.
Within the LD2 family this is value 7 of 41, in a range that runs from 1 to 2200 uH.
The drum core family covers about 1 µH to tens of microhenry in axial, radial and surface-mount bodies. It is the value range between the chip inductors and the large toroids.
Can it be used in a switching converter?
Yes, within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
What is the rated current based on?
A defined temperature rise from DC current. At higher ambient the thermal margin shrinks, so derate against the actual board temperature.
What is the rated current based on?
A defined temperature rise from DC current. At higher ambient the thermal margin shrinks, so derate against the actual board temperature.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd