Eaton LD2-820-HV 82.0 uH Drum Core Choke
Eaton LD2-820-HV 82.0 uH Drum Core Choke

Eaton LD2-820-HV 82.0 uH Drum Core Choke

Share
LD2-820-HV: metalized drum core inductor, 82.0 uH ±20%, – A, Isat 0.9 A, DCR 300 mOhm.
    • Product Details
    • Download

    Eaton LD2-820-HV 82.0 uH Drum Core Choke

    LD2-820-HV at a glance: metalized drum core inductor, 82.0 uH ±20%, – A, Isat 0.9 A, DCR 300 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberLD2-820-HV
    Inductance82.0 uH ±20%
    DCR maximum @ +25 °C300 mOhm
    Isat0.9 A
    FLL minimum (at Isat)52.5 uH
    Impulse test voltage1000 V
    Hi-pot test voltage1000 V
    MountingThrough-hole
    Operating temperature-25 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1200

    Mechanical Drawing

    LD2-820-HV mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1200: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a wound inductor on a drum core with metalized terminations. The value range runs from about a microhenry into the tens of microhenry, which puts it in the region where a multilayer part would need too many turns to be practical.

    Saturation is reached at 0.9 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    Within the LD2 family this is value 22 of 41, in a range that runs from 1 to 2200 uH.

    Positioning in the Range

    The drum core family covers about 1 µH to tens of microhenry in axial, radial and surface-mount bodies. It is the value range between the chip inductors and the large toroids.

    • The open magnetic path means nearby metal changes the inductance. Keep the specified clearance to shields and screws.
    • Typical applications: ac/dc direct buck converters; smart water heaters; smart home/kitchen appliances; smart heating systems/pumps; iot devices power converters.
    • Design note: the value tolerance is wide by design; do not build a resonant circuit around the nominal inductance without checking the band.

    Frequently Asked Questions

    Why use a drum core rather than a molded part?
    More inductance per unit cost in the mid range, and a wider value selection. The trade is a more open magnetic path and a larger body.

    Can it be used in a switching converter?
    Yes, within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What is the rated current based on?
    A defined temperature rise from DC current. At higher ambient the thermal margin shrinks, so derate against the actual board temperature.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message