
| Parameter | Value |
|---|---|
| Orderable part number | LDS0705-331M-R |
| Inductance | 329.9 uH ±20% |
| DCR maximum @ +25 °C | 1060 mOhm |
| Irms (DC, 40 °C rise) | 0.47 A |
| Isat | 0.438 A |
| K-factor | 1.3 |
| Package | 7.8 x 7 x 5 mm |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4142 |

Drawing reproduced from Eaton Technical Data 4142: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
The drum geometry concentrates the field in the core but leaves the ends open, so the inductance depends on the surroundings more than a shielded part would. That is acceptable in the applications these parts serve – filters, bias supplies, low current DC-DC stages – where the board is not densely packed.
At 0.47 A the winding dissipates about 0.234 W in copper, using the 1060 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.
Saturation is reached at 0.438 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.
Within the LDS0705 family this is value 18 of 19, in a range that runs from 0.861 to 467 uH.
The drum core family covers about 1 µH to tens of microhenry in axial, radial and surface-mount bodies. It is the value range between the chip inductors and the large toroids.
Can it be used in a switching converter?
Yes, within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
What is the rated current based on?
A defined temperature rise from DC current. At higher ambient the thermal margin shrinks, so derate against the actual board temperature.
Is the part shielded?
The drum concentrates flux in the core but the ends are open. Keep sensitive traces away from the axis of the part.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd