Eaton LDS0705-470M-R 45.71 uH Radial Inductor 158 mOhm
Eaton LDS0705-470M-R 45.71 uH Radial Inductor 158 mOhm

Eaton LDS0705-470M-R 45.71 uH Radial Inductor 158 mOhm

Share
LDS0705-470M-R: metalized drum core inductor, 45.71 uH ±20%, 1.21 A, Isat 1.18 A, DCR 158 mOhm.
    • Product Details
    • Download

    Eaton LDS0705-470M-R 45.71 uH Radial Inductor 158 mOhm

    LDS0705-470M-R at a glance: metalized drum core inductor, 45.71 uH ±20%, 1.21 A, Isat 1.18 A, DCR 158 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberLDS0705-470M-R
    Inductance45.71 uH ±20%
    DCR maximum @ +25 °C158 mOhm
    Irms (DC, 40 °C rise)1.21 A
    Isat1.18 A
    K-factor3.4
    Package7.8 x 7 x 5 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4142

    Mechanical Dimensions & Pad Layout

    LDS0705-470M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4142: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The drum geometry concentrates the field in the core but leaves the ends open, so the inductance depends on the surroundings more than a shielded part would. That is acceptable in the applications these parts serve – filters, bias supplies, low current DC-DC stages – where the board is not densely packed.

    At 1.21 A the winding dissipates about 0.231 W in copper, using the 158 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 1.18 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    Within the LDS0705 family this is value 12 of 19, in a range that runs from 0.861 to 467 uH.

    Where This Series Fits

    The drum core family covers about 1 µH to tens of microhenry in axial, radial and surface-mount bodies. It is the value range between the chip inductors and the large toroids.

    • The open magnetic path means nearby metal changes the inductance. Keep the specified clearance to shields and screws.
    • Typical applications: buck or boost inductor; noise filtering and output filter chokes; battery power, dc-dc converters; notebook and laptop power; hand held devices.
    • Design note: the value tolerance is wide by design; do not build a resonant circuit around the nominal inductance without checking the band.

    Frequently Asked Questions

    What is the rated current based on?
    A defined temperature rise from DC current. At higher ambient the thermal margin shrinks, so derate against the actual board temperature.

    Why use a drum core rather than a molded part?
    More inductance per unit cost in the mid range, and a wider value selection. The trade is a more open magnetic path and a larger body.

    Why use a drum core rather than a molded part?
    More inductance per unit cost in the mid range, and a wider value selection. The trade is a more open magnetic path and a larger body.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message