Eaton MCL1608V1-1R2-R 1.2 uH SMD Inductor, SRF 65 MHz
Eaton MCL1608V1-1R2-R 1.2 uH SMD Inductor, SRF 65 MHz

Eaton MCL1608V1-1R2-R 1.2 uH SMD Inductor, SRF 65 MHz

Share
MCL1608V1-1R2-R: multilayer chip inductor, 1.2 uH , Q -, SRF 65 MHz, 150 mA, DCR 300 mOhm.
    • Product Details
    • Download

    Eaton MCL1608V1-1R2-R 1.2 uH SMD Inductor, SRF 65 MHz

    MCL1608V1-1R2-R at a glance: multilayer chip inductor, 1.2 uH , Q -, SRF 65 MHz, 150 mA, DCR 300 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberMCL1608V1-1R2-R
    Inductance1.2 uH
    DCR maximum @ +25 °C300 mOhm
    Rated current maximum150 mA
    SRF minimum65 MHz
    Test frequency1 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10926

    Dimensions and Pad Layout

    MCL1608V1-1R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10926: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    Reading the Data Sheet

    Where a circuit needs a small, stable inductance in a package measured in millimetres, the multilayer chip is the default. Its self-resonant frequency is the practical ceiling – above it the part behaves like a capacitor, so the SRF column is the first thing to check against the operating band.

    The row reads 1.2 uH with a minimum Q of – at 1 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of – means the part’s loss is about 100 % of its reactance in that band.

    Self-resonance is quoted as 65 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 65 MHz is the design headroom.

    Within the MCL1608V1 family this is value 18 of 30, in a range that runs from 0.047 to 12 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products