Eaton MCL1608V1-R33-R 0.33 nH Multilayer Inductor
Eaton MCL1608V1-R33-R 0.33 nH Multilayer Inductor

Eaton MCL1608V1-R33-R 0.33 nH Multilayer Inductor

Share
MCL1608V1-R33-R: multilayer chip inductor, 0.33 nH , Q -, SRF 125 MHz, 100 mA, DCR 300 mOhm.
    • Product Details
    • Download

    Eaton MCL1608V1-R33-R 0.33 nH Multilayer Inductor

    MCL1608V1-R33-R at a glance: multilayer chip inductor, 0.33 nH , Q -, SRF 125 MHz, 100 mA, DCR 300 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMCL1608V1-R33-R
    Inductance0.33 nH
    DCR maximum @ +25 °C300 mOhm
    Rated current maximum100 mA
    SRF minimum125 MHz
    Test frequency1 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10926

    Outline Drawing

    MCL1608V1-R33-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10926: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    The inductance here is a few nanohenry, which puts the part in RF and high-speed digital territory: matching networks, filter sections, bias chokes on amplifier supplies, and the small isolation inductors that keep clock harmonics out of connectors. The multilayer body keeps the parasitics predictable, and the Q column tells you how much loss the part adds at the test frequency.

    The row reads 0.33 nH with a minimum Q of – at 1 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of – means the part’s loss is about 100 % of its reactance in that band.

    Self-resonance is quoted as 125 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 125 MHz is the design headroom.

    Within the MCL1608V1 family this is value 11 of 30, in a range that runs from 0.047 to 12 nH.

    Positioning in the Range

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products