Eaton MCL1608V2-270-R 27.0 nH Chip Inductor, 100 Q
Eaton MCL1608V2-270-R 27.0 nH Chip Inductor, 100 Q

Eaton MCL1608V2-270-R 27.0 nH Chip Inductor, 100 Q

Share
MCL1608V2-270-R: multilayer chip inductor, 27.0 nH 300, Q 100, SRF 12 MHz, 1 mA, DCR 1700000 mOhm.
    • Product Details
    • Download

    Eaton MCL1608V2-270-R 27.0 nH Chip Inductor, 100 Q

    MCL1608V2-270-R at a glance: multilayer chip inductor, 27.0 nH 300, Q 100, SRF 12 MHz, 1 mA, DCR 1700000 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberMCL1608V2-270-R
    Inductance27.0 nH 300
    Q minimum100
    DCR maximum @ +25 °C1700000 mOhm
    Rated current maximum1 mA
    SRF minimum12 MHz
    Test frequency50 MHz
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10927

    Mechanical Drawing

    MCL1608V2-270-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10927: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    Where a circuit needs a small, stable inductance in a package measured in millimetres, the multilayer chip is the default. Its self-resonant frequency is the practical ceiling – above it the part behaves like a capacitor, so the SRF column is the first thing to check against the operating band.

    The row reads 27.0 nH 300 with a minimum Q of 100 at 50 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 100 means the part’s loss is about 1 % of its reactance in that band.

    Self-resonance is quoted as 12 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 12 MHz is the design headroom.

    Within the MCL1608V2 family this is value 18 of 34, in a range that runs from 0.001 to 0.47 nH.

    What This Family Is For

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products