Eaton MCL1608V2-431-R 430.0 nH Multilayer Inductor 150
Eaton MCL1608V2-431-R 430.0 nH Multilayer Inductor 150

Eaton MCL1608V2-431-R 430.0 nH Multilayer Inductor 150

Share
MCL1608V2-431-R: multilayer chip inductor, 430.0 nH 150, Q 50, SRF 8 MHz, 3 mA, DCR 280000 mOhm.
    • Product Details
    • Download

    Eaton MCL1608V2-431-R 430.0 nH Multilayer Inductor 150

    MCL1608V2-431-R at a glance: multilayer chip inductor, 430.0 nH 150, Q 50, SRF 8 MHz, 3 mA, DCR 280000 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMCL1608V2-431-R
    Inductance430.0 nH 150
    Q minimum50
    DCR maximum @ +25 °C280000 mOhm
    Rated current maximum3 mA
    SRF minimum8 MHz
    Test frequency50 MHz
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10927

    Mechanical Drawing

    MCL1608V2-431-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10927: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    A multilayer chip inductor is a coil printed in layers of ceramic and metal, fired into a single body. There is no winding to buzz or shift, the inductance is set by the printed pattern, and the part sits on the board like any other 0402 or 0603 component. That construction is why these parts are used wherever the value is small and the quantity is large.

    The row reads 430.0 nH 150 with a minimum Q of 50 at 50 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 50 means the part’s loss is about 2 % of its reactance in that band.

    Self-resonance is quoted as 8 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 8 MHz is the design headroom.

    Within the MCL1608V2 family this is value 33 of 34, in a range that runs from 0.001 to 0.47 nH.

    Positioning in the Range

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products