Eaton MCL1608V2-6R8-R 6.8 nH Chip Inductor 0603
Eaton MCL1608V2-6R8-R 6.8 nH Chip Inductor 0603

Eaton MCL1608V2-6R8-R 6.8 nH Chip Inductor 0603

Share
MCL1608V2-6R8-R: multilayer chip inductor, 6.8 nH 500, Q 100, SRF 10 MHz, 0 mA, DCR 5000000 mOhm.
    • Product Details
    • Download

    Eaton MCL1608V2-6R8-R 6.8 nH Chip Inductor 0603

    MCL1608V2-6R8-R at a glance: multilayer chip inductor, 6.8 nH 500, Q 100, SRF 10 MHz, 0 mA, DCR 5000000 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMCL1608V2-6R8-R
    Inductance6.8 nH 500
    Q minimum100
    DCR maximum @ +25 °C5000000 mOhm
    Rated current maximum0 mA
    SRF minimum10 MHz
    Test frequency50 MHz
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10927

    Dimensions and Pad Layout

    MCL1608V2-6R8-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10927: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a surface-mount multilayer inductor: printed coil, sintered body, silver terminations. The value is quoted at a defined test frequency because at these inductances the measurement conditions matter as much as the part.

    The row reads 6.8 nH 500 with a minimum Q of 100 at 50 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 100 means the part’s loss is about 1 % of its reactance in that band.

    Self-resonance is quoted as 10 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 10 MHz is the design headroom.

    Within the MCL1608V2 family this is value 11 of 34, in a range that runs from 0.001 to 0.47 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products