Eaton MCL2V0603-1R8-R 1.8 nH Chip Inductor, 14 Q
Eaton MCL2V0603-1R8-R 1.8 nH Chip Inductor, 14 Q

Eaton MCL2V0603-1R8-R 1.8 nH Chip Inductor, 14 Q

Share
MCL2V0603-1R8-R: multilayer chip inductor, 1.8 nH ±0.3nH, Q 14, SRF 10000 MHz, 500 mA, DCR 150 mOhm.
    • Product Details
    • Download

    Eaton MCL2V0603-1R8-R 1.8 nH Chip Inductor, 14 Q

    MCL2V0603-1R8-R at a glance: multilayer chip inductor, 1.8 nH ±0.3nH, Q 14, SRF 10000 MHz, 500 mA, DCR 150 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMCL2V0603-1R8-R
    Inductance1.8 nH ±0.3nH
    Q minimum14
    DCR maximum @ +25 °C150 mOhm
    Rated current maximum500 mA
    SRF minimum10000 MHz
    Test frequency500 MHz
    Test voltage50 mV
    Package0.6 x 0.3 mm
    Size code0603 (0201)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11227

    Dimensions and Pad Layout

    MCL2V0603-1R8-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11227: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The inductance here is a few nanohenry, which puts the part in RF and high-speed digital territory: matching networks, filter sections, bias chokes on amplifier supplies, and the small isolation inductors that keep clock harmonics out of connectors. The multilayer body keeps the parasitics predictable, and the Q column tells you how much loss the part adds at the test frequency.

    The row reads 1.8 nH ±0.3nH with a minimum Q of 14 at 500 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 14 means the part’s loss is about 7.14 % of its reactance in that band.

    Self-resonance is quoted as 10000 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 10000 MHz is the design headroom.

    Within the MCL2V0603 family this is value 13 of 62, in a range that runs from 0.001 to 0.12 nH.

    What This Family Is For

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products