Eaton MCLA1608V2-560-R 56.0 nH SMD Inductor, SRF 1100 MHz
Eaton MCLA1608V2-560-R 56.0 nH SMD Inductor, SRF 1100 MHz

Eaton MCLA1608V2-560-R 56.0 nH SMD Inductor, SRF 1100 MHz

Share
MCLA1608V2-560-R: multilayer chip inductor, 56.0 nH ±5%, Q 12, SRF 1100 MHz, 300 mA, DCR 750 mOhm.
    • Product Details
    • Download

    Eaton MCLA1608V2-560-R 56.0 nH SMD Inductor, SRF 1100 MHz

    MCLA1608V2-560-R at a glance: multilayer chip inductor, 56.0 nH ±5%, Q 12, SRF 1100 MHz, 300 mA, DCR 750 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMCLA1608V2-560-R
    Inductance56.0 nH ±5%
    Q minimum12
    DCR maximum @ +25 °C750 mOhm
    Rated current maximum300 mA
    SRF minimum1100 MHz
    Test frequency100 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10976

    Outline Drawing

    Outline drawing and pad layout are on page 2 of Eaton Technical Data 10976; the package column above gives the body size in millimetres.

    The Figures Explained

    Where a circuit needs a small, stable inductance in a package measured in millimetres, the multilayer chip is the default. Its self-resonant frequency is the practical ceiling – above it the part behaves like a capacitor, so the SRF column is the first thing to check against the operating band.

    The row reads 56.0 nH ±5% with a minimum Q of 12 at 100 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 12 means the part’s loss is about 8.33 % of its reactance in that band.

    Self-resonance is quoted as 1100 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 1100 MHz is the design headroom.

    Within the MCLA1608V2 family this is value 22 of 34, in a range that runs from 0.001 to 0.47 nH.

    Positioning in the Range

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products