Eaton MCQ1V1608-2R2-R 2.2 uH Chip Inductor 0603
Eaton MCQ1V1608-2R2-R 2.2 uH Chip Inductor 0603

Eaton MCQ1V1608-2R2-R 2.2 uH Chip Inductor 0603

Share
MCQ1V1608-2R2-R: multilayer chip inductor, 2.2 uH ±10, Q 25, SRF 50 MHz, 25 mA, DCR 800 mOhm.
    • Product Details
    • Download

    Eaton MCQ1V1608-2R2-R 2.2 uH Chip Inductor 0603

    MCQ1V1608-2R2-R at a glance: multilayer chip inductor, 2.2 uH ±10, Q 25, SRF 50 MHz, 25 mA, DCR 800 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMCQ1V1608-2R2-R
    Inductance2.2 uH ±10
    Q minimum25
    DCR maximum @ +25 °C800 mOhm
    Rated current maximum25 mA
    SRF minimum50 MHz
    Test frequency10 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11101

    Mechanical Drawing

    MCQ1V1608-2R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11101: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The inductance here is a few nanohenry, which puts the part in RF and high-speed digital territory: matching networks, filter sections, bias chokes on amplifier supplies, and the small isolation inductors that keep clock harmonics out of connectors. The multilayer body keeps the parasitics predictable, and the Q column tells you how much loss the part adds at the test frequency.

    The row reads 2.2 uH ±10 with a minimum Q of 25 at 10 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 25 means the part’s loss is about 4 % of its reactance in that band.

    Self-resonance is quoted as 50 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 50 MHz is the design headroom.

    Within the MCQ1V1608 family this is value 21 of 24, in a range that runs from 0.047 to 3.9 nH.

    Where This Series Fits

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products