Eaton MCQ1V2012-R470-R 0.47 nH Chip Inductor, 25 Q
Eaton MCQ1V2012-R470-R 0.47 nH Chip Inductor, 25 Q

Eaton MCQ1V2012-R470-R 0.47 nH Chip Inductor, 25 Q

Share
MCQ1V2012-R470-R: multilayer chip inductor, 0.47 nH ±10, Q 25, SRF 125 MHz, 200 mA, DCR 500 mOhm.
    • Product Details
    • Download

    Eaton MCQ1V2012-R470-R 0.47 nH Chip Inductor, 25 Q

    MCQ1V2012-R470-R at a glance: multilayer chip inductor, 0.47 nH ±10, Q 25, SRF 125 MHz, 200 mA, DCR 500 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMCQ1V2012-R470-R
    Inductance0.47 nH ±10
    Q minimum25
    DCR maximum @ +25 °C500 mOhm
    Rated current maximum200 mA
    SRF minimum125 MHz
    Test frequency25 MHz
    Test voltage50 mV
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11103

    Outline Drawing

    MCQ1V2012-R470-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11103: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The inductance here is a few nanohenry, which puts the part in RF and high-speed digital territory: matching networks, filter sections, bias chokes on amplifier supplies, and the small isolation inductors that keep clock harmonics out of connectors. The multilayer body keeps the parasitics predictable, and the Q column tells you how much loss the part adds at the test frequency.

    The row reads 0.47 nH ±10 with a minimum Q of 25 at 25 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 25 means the part’s loss is about 4 % of its reactance in that band.

    Self-resonance is quoted as 125 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 125 MHz is the design headroom.

    Within the MCQ1V2012 family this is value 13 of 25, in a range that runs from 0.047 to 4.7 nH.

    Positioning in the Range

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products