Eaton MCQ1V3216-1R5-R 1.5 uH Chip Inductor 1206
Eaton MCQ1V3216-1R5-R 1.5 uH Chip Inductor 1206

Eaton MCQ1V3216-1R5-R 1.5 uH Chip Inductor 1206

Share
MCQ1V3216-1R5-R: multilayer chip inductor, 1.5 uH ±10, Q 35, SRF 60 MHz, 50 mA, DCR 400 mOhm.
    • Product Details
    • Download

    Eaton MCQ1V3216-1R5-R 1.5 uH Chip Inductor 1206

    MCQ1V3216-1R5-R at a glance: multilayer chip inductor, 1.5 uH ±10, Q 35, SRF 60 MHz, 50 mA, DCR 400 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMCQ1V3216-1R5-R
    Inductance1.5 uH ±10
    Q minimum35
    DCR maximum @ +25 °C400 mOhm
    Rated current maximum50 mA
    SRF minimum60 MHz
    Test frequency10 MHz
    Test voltage50 mV
    Package3.2 x 1.6 mm
    Size code3216 (1206)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11102

    Dimensions and Pad Layout

    MCQ1V3216-1R5-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11102: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The inductance here is a few nanohenry, which puts the part in RF and high-speed digital territory: matching networks, filter sections, bias chokes on amplifier supplies, and the small isolation inductors that keep clock harmonics out of connectors. The multilayer body keeps the parasitics predictable, and the Q column tells you how much loss the part adds at the test frequency.

    The row reads 1.5 uH ±10 with a minimum Q of 35 at 10 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 35 means the part’s loss is about 2.86 % of its reactance in that band.

    Self-resonance is quoted as 60 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 60 MHz is the design headroom.

    Within the MCQ1V3216 family this is value 19 of 25, in a range that runs from 0.047 to 4.7 nH.

    What This Family Is For

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message