Eaton MCQ1V3216-1R8-R 1.8 uH SMD Inductor, SRF 55 MHz
Eaton MCQ1V3216-1R8-R 1.8 uH SMD Inductor, SRF 55 MHz

Eaton MCQ1V3216-1R8-R 1.8 uH SMD Inductor, SRF 55 MHz

Share
MCQ1V3216-1R8-R: multilayer chip inductor, 1.8 uH ±10, Q 35, SRF 55 MHz, 50 mA, DCR 400 mOhm.
    • Product Details
    • Download

    Eaton MCQ1V3216-1R8-R 1.8 uH SMD Inductor, SRF 55 MHz

    MCQ1V3216-1R8-R at a glance: multilayer chip inductor, 1.8 uH ±10, Q 35, SRF 55 MHz, 50 mA, DCR 400 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMCQ1V3216-1R8-R
    Inductance1.8 uH ±10
    Q minimum35
    DCR maximum @ +25 °C400 mOhm
    Rated current maximum50 mA
    SRF minimum55 MHz
    Test frequency10 MHz
    Test voltage50 mV
    Package3.2 x 1.6 mm
    Size code3216 (1206)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11102

    Outline Drawing

    MCQ1V3216-1R8-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11102: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    Reading the Data Sheet

    This is a surface-mount multilayer inductor: printed coil, sintered body, silver terminations. The value is quoted at a defined test frequency because at these inductances the measurement conditions matter as much as the part.

    The row reads 1.8 uH ±10 with a minimum Q of 35 at 10 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 35 means the part’s loss is about 2.86 % of its reactance in that band.

    Self-resonance is quoted as 55 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 55 MHz is the design headroom.

    Within the MCQ1V3216 family this is value 20 of 25, in a range that runs from 0.047 to 4.7 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products