Eaton MFBA2V2012P-331-R 330 Ohm Ferrite Bead, 2800 mA
Eaton MFBA2V2012P-331-R 330 Ohm Ferrite Bead, 2800 mA

Eaton MFBA2V2012P-331-R 330 Ohm Ferrite Bead, 2800 mA

Share
MFBA2V2012P-331-R: multilayer ferrite bead, 330 Ohm at 100 MHz, 2800 mA, DCR 40 mOhm.
    • Product Details
    • Download

    Eaton MFBA2V2012P-331-R 330 Ohm Ferrite Bead, 2800 mA

    MFBA2V2012P-331-R at a glance: multilayer ferrite bead, 330 Ohm at 100 MHz, 2800 mA, DCR 40 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMFBA2V2012P-331-R
    Impedance @ 100 MHz330 Ohm
    DCR maximum @ +25 °C40 mOhm
    Rated current maximum2800 mA
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-55 °C to +150 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1132

    Mechanical Dimensions & Pad Layout

    MFBA2V2012P-331-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1132: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    A ferrite bead is not an inductor in the usual sense: it is a lossy element. At low frequency it looks like a small resistance in series with the line; at the frequency where the ferrite absorbs, its impedance rises and the noise energy is converted into heat in the material rather than reflected back into the circuit.

    At 100 MHz this bead presents 330 ohm, and its DC resistance is 40 mOhm maximum. At the rated 2800 mA that resistance drops 0.112 V, which is the figure to check against the rail tolerance.

    Within the MFBA2V2012P family this is value 4 of 6, in a range that runs from 0 to 0 nH.

    What This Family Is For

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: body electronics (keyless entry, ecu, antennas); advanced driver assistance systems (adas); infotainment and cluster electronics; safety electronics systems; wlan, wifi, bluetooth.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products