Eaton MFBA2V2012P-601-R 600 Ohm Ferrite Bead 0805
Eaton MFBA2V2012P-601-R 600 Ohm Ferrite Bead 0805

Eaton MFBA2V2012P-601-R 600 Ohm Ferrite Bead 0805

Share
MFBA2V2012P-601-R: multilayer ferrite bead, 600 Ohm at 100 MHz, 2300 mA, DCR 60 mOhm.
    • Product Details
    • Download

    Eaton MFBA2V2012P-601-R 600 Ohm Ferrite Bead 0805

    MFBA2V2012P-601-R at a glance: multilayer ferrite bead, 600 Ohm at 100 MHz, 2300 mA, DCR 60 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMFBA2V2012P-601-R
    Impedance @ 100 MHz600 Ohm
    DCR maximum @ +25 °C60 mOhm
    Rated current maximum2300 mA
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-55 °C to +150 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1132

    Outline Drawing

    MFBA2V2012P-601-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1132: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The number on the label is impedance at 100 MHz, in ohms. That single figure is what most designs are specified against, but the shape of the impedance curve around it is what actually decides whether the bead kills a 30 MHz switching harmonic or only the 300 MHz edge.

    At 100 MHz this bead presents 600 ohm, and its DC resistance is 60 mOhm maximum. At the rated 2300 mA that resistance drops 0.138 V, which is the figure to check against the rail tolerance.

    Within the MFBA2V2012P family this is value 6 of 6, in a range that runs from 0 to 0 nH.

    What This Family Is For

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: body electronics (keyless entry, ecu, antennas); advanced driver assistance systems (adas); infotainment and cluster electronics; safety electronics systems; wlan, wifi, bluetooth.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    Does the bead dissipate the noise as heat?
    Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    Does the bead dissipate the noise as heat?
    Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products