
| Parameter | Value |
|---|---|
| Orderable part number | MFBM1V1608-121-R |
| Impedance @ 100 MHz | 120 Ohm |
| Impedance tolerance | ±25% |
| DCR maximum @ +25 °C | 65 mOhm |
| Rated current maximum | 2000 mA |
| Test frequency | 100 MHz |
| Test voltage | 50 mV |
| Package | 1.6 x 0.8 mm |
| Size code | 1608 (0603) |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 11111 |

Drawing reproduced from Eaton Technical Data 11111: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
The number on the label is impedance at 100 MHz, in ohms. That single figure is what most designs are specified against, but the shape of the impedance curve around it is what actually decides whether the bead kills a 30 MHz switching harmonic or only the 300 MHz edge.
At 100 MHz this bead presents 120 ohm with an allowed spread of ±25%, and its DC resistance is 65 mOhm maximum. At the rated 2000 mA that resistance drops 0.13 V, which is the figure to check against the rail tolerance.
Within the MFBM1V1608 family this is value 15 of 23, in a range that runs from 0 to 0 nH.
The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.
Does the bead dissipate the noise as heat?
Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.
Is impedance at 100 MHz the whole story?
No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.
Does the bead dissipate the noise as heat?
Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd