Eaton MFBM1V1608-181-R 180 Ohm Ferrite Bead, 1500 mA
Eaton MFBM1V1608-181-R 180 Ohm Ferrite Bead, 1500 mA

Eaton MFBM1V1608-181-R 180 Ohm Ferrite Bead, 1500 mA

Share
MFBM1V1608-181-R: multilayer ferrite bead, 180 Ohm at 100 MHz, 1500 mA, DCR 90 mOhm.
    • Product Details
    • Download

    Eaton MFBM1V1608-181-R 180 Ohm Ferrite Bead, 1500 mA

    MFBM1V1608-181-R at a glance: multilayer ferrite bead, 180 Ohm at 100 MHz, 1500 mA, DCR 90 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberMFBM1V1608-181-R
    Impedance @ 100 MHz180 Ohm
    Impedance tolerance±25%
    DCR maximum @ +25 °C90 mOhm
    Rated current maximum1500 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11111

    Dimensions and Pad Layout

    MFBM1V1608-181-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11111: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    A ferrite bead is not an inductor in the usual sense: it is a lossy element. At low frequency it looks like a small resistance in series with the line; at the frequency where the ferrite absorbs, its impedance rises and the noise energy is converted into heat in the material rather than reflected back into the circuit.

    At 100 MHz this bead presents 180 ohm with an allowed spread of ±25%, and its DC resistance is 90 mOhm maximum. At the rated 1500 mA that resistance drops 0.135 V, which is the figure to check against the rail tolerance.

    Within the MFBM1V1608 family this is value 17 of 23, in a range that runs from 0 to 0 nH.

    Series Positioning

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antennas.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products