Eaton MFBM1V2012-501-R 500 Ohm Ferrite Bead 0805
Eaton MFBM1V2012-501-R 500 Ohm Ferrite Bead 0805

Eaton MFBM1V2012-501-R 500 Ohm Ferrite Bead 0805

Share
MFBM1V2012-501-R: multilayer ferrite bead, 500 Ohm at 100 MHz, 2000 mA, DCR 100 mOhm.
    • Product Details
    • Download

    Eaton MFBM1V2012-501-R 500 Ohm Ferrite Bead 0805

    MFBM1V2012-501-R at a glance: multilayer ferrite bead, 500 Ohm at 100 MHz, 2000 mA, DCR 100 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMFBM1V2012-501-R
    Impedance @ 100 MHz500 Ohm
    Impedance tolerance±25%
    DCR maximum @ +25 °C100 mOhm
    Rated current maximum2000 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11112

    Dimensions and Pad Layout

    MFBM1V2012-501-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11112: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    The number on the label is impedance at 100 MHz, in ohms. That single figure is what most designs are specified against, but the shape of the impedance curve around it is what actually decides whether the bead kills a 30 MHz switching harmonic or only the 300 MHz edge.

    At 100 MHz this bead presents 500 ohm with an allowed spread of ±25%, and its DC resistance is 100 mOhm maximum. At the rated 2000 mA that resistance drops 0.2 V, which is the figure to check against the rail tolerance.

    Within the MFBM1V2012 family this is value 20 of 22, in a range that runs from 0 to 0 nH.

    Series Positioning

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antennas.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message