
| Parameter | Value |
|---|---|
| Orderable part number | MFBM1V3216-151-R |
| Impedance @ 100 MHz | 150 Ohm |
| Impedance tolerance | ±25% |
| DCR maximum @ +25 °C | 45 mOhm |
| Rated current maximum | 3000 mA |
| Test frequency | 100 MHz |
| Test voltage | 50 mV |
| Package | 3.2 x 1.6 mm |
| Size code | 3216 (1206) |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 11113 |

Drawing reproduced from Eaton Technical Data 11113: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
Beads are placed in series with a supply or signal line to take the high-frequency edge off it. The rated current and the DCR decide whether the part can sit in a power path; the impedance decides how much noise it removes.
At 100 MHz this bead presents 150 ohm with an allowed spread of ±25%, and its DC resistance is 45 mOhm maximum. At the rated 3000 mA that resistance drops 0.135 V, which is the figure to check against the rail tolerance.
Within the MFBM1V3216 family this is value 18 of 25, in a range that runs from 0 to 0 nH.
The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.
Does the bead dissipate the noise as heat?
Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.
How do I choose between MFBM and MFBW?
MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.
How do I choose between MFBM and MFBW?
MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd