Eaton MFBW1V1005-801-R 800 Ohm Ferrite Bead 0402
Eaton MFBW1V1005-801-R 800 Ohm Ferrite Bead 0402

Eaton MFBW1V1005-801-R 800 Ohm Ferrite Bead 0402

Share
MFBW1V1005-801-R: multilayer ferrite bead, 800 Ohm at 100 MHz, 200 mA, DCR 900 mOhm.
    • Product Details
    • Download

    Eaton MFBW1V1005-801-R 800 Ohm Ferrite Bead 0402

    MFBW1V1005-801-R at a glance: multilayer ferrite bead, 800 Ohm at 100 MHz, 200 mA, DCR 900 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMFBW1V1005-801-R
    Impedance @ 100 MHz800 Ohm
    Impedance tolerance±25%
    DCR maximum @ +25 °C900 mOhm
    Rated current maximum200 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package1.0 x 0.5 mm
    Size code1005 (0402)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11106

    Mechanical Dimensions & Pad Layout

    MFBW1V1005-801-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11106: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    A ferrite bead is not an inductor in the usual sense: it is a lossy element. At low frequency it looks like a small resistance in series with the line; at the frequency where the ferrite absorbs, its impedance rises and the noise energy is converted into heat in the material rather than reflected back into the circuit.

    At 100 MHz this bead presents 800 ohm with an allowed spread of ±25%, and its DC resistance is 900 mOhm maximum. At the rated 200 mA that resistance drops 0.18 V, which is the figure to check against the rail tolerance.

    Within the MFBW1V1005 family this is value 25 of 26, in a range that runs from 0 to 0 nH.

    What This Family Is For

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products