
| Parameter | Value |
|---|---|
| Orderable part number | MFBW1V1608-152-R |
| Impedance @ 100 MHz | 1500 Ohm |
| Impedance tolerance | ±25% |
| DCR maximum @ +25 °C | 750 mOhm |
| Rated current maximum | 400 mA |
| Test frequency | 100 MHz |
| Test voltage | 50 mV |
| Package | 1.6 x 0.8 mm |
| Size code | 1608 (0603) |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 11107 |

Drawing reproduced from Eaton Technical Data 11107: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
This is a multilayer chip bead: ferrite sheets printed with internal electrodes, fired into one body. The impedance comes from the magnetic material, not from a winding, so the part stays effective at frequencies where a wire-wound bead would have already turned capacitive.
At 100 MHz this bead presents 1500 ohm with an allowed spread of ±25%, and its DC resistance is 750 mOhm maximum. At the rated 400 mA that resistance drops 0.3 V, which is the figure to check against the rail tolerance.
Within the MFBW1V1608 family this is value 26 of 28, in a range that runs from 0 to 0 nH.
The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.
How do I choose between MFBM and MFBW?
MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.
What does the impedance tolerance mean?
It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.
Does the bead dissipate the noise as heat?
Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd