
| Parameter | Value |
|---|---|
| Orderable part number | MFBW1V3216-190-R |
| Impedance @ 100 MHz | 19 Ohm |
| Impedance tolerance | 12~25 Ω |
| DCR maximum @ +25 °C | 50 mOhm |
| Rated current maximum | 3000 mA |
| Test frequency | 100 MHz |
| Test voltage | 50 mV |
| Package | 3.2 x 1.6 mm |
| Size code | 3216 (1206) |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 11109 |

Drawing reproduced from Eaton Technical Data 11109: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
Beads are placed in series with a supply or signal line to take the high-frequency edge off it. The rated current and the DCR decide whether the part can sit in a power path; the impedance decides how much noise it removes.
At 100 MHz this bead presents 19 ohm with an allowed spread of 12~25 Ω, and its DC resistance is 50 mOhm maximum. At the rated 3000 mA that resistance drops 0.15 V, which is the figure to check against the rail tolerance.
Within the MFBW1V3216 family this is value 7 of 29, in a range that runs from 0 to 0 nH.
The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.
What does the impedance tolerance mean?
It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.
Is impedance at 100 MHz the whole story?
No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.
How do I choose between MFBM and MFBW?
MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd