Eaton MOV10V275 275 Vac Radial Varistor
Eaton MOV10V275 275 Vac Radial Varistor

Eaton MOV10V275 275 Vac Radial Varistor

Share
MOV10V275: radial leaded metal oxide varistor, 430 V varistor voltage, 350 V working, 710 V clamp, 230 pF, 65 J.
    • Product Details
    • Download

    Eaton MOV10V275 275 Vac Radial Varistor

    MOV10V275 at a glance: radial leaded metal oxide varistor, 430 V varistor voltage, 350 V working, 710 V clamp, 230 pF, 65 J.

    Electrical Specifications

    ParameterValue
    Orderable part numberMOV10V275
    Varistor voltage at 1 mA430 V
    Maximum continuous AC voltage275 Vrms
    Maximum continuous DC voltage350 Vdc
    Clamping voltage710 V
    Clamping current25 A
    Maximum surge current, 8/20 us2500 A
    Rated power0.4 W
    Typical capacitance at 1 kHz230 pF
    Maximum energy, 10/1000 us65 J
    Maximum body diameter5.5 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package10 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1287

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    How to Read These Ratings

    The disc is coated in epoxy and marked with the part number and the varistor voltage. Because the body is the component, the lead spacing and the disc diameter together decide the footprint – there is no separate package to shrink around it.

    The clamp column works out at 1.65 times the varistor voltage: 710 V at the rated current against 430 V at 1 mA. That ratio is what the downstream part has to survive, not the 430 V figure on the label.

    The disc absorbs 65 J in a 10/1000 us pulse and carries 2500 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 0.4 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 230 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOV family this is item 24 of 71 in the Eaton catalogue.

    Series Positioning

    Mount it with the body clear of the transformer and the bridge rectifier; a disc running at its rated power needs air, and the derating curve assumes it gets some.

    • A varistor that has failed short looks like a low-value resistor across the line. Always pair a mains varistor with a fuse or a thermal element.
    • Disc diameter sets both the energy and the lead spacing. A 20 mm part needs a 7.5 mm hole pitch, so the footprint decision comes before the electrical one.

    Frequently Asked Questions

    How do I size the disc diameter?
    From the energy, not the current. Estimate the joule content of the surge your source can deliver, add margin for repeated events, and pick the smallest disc that covers it; a larger disc also raises the capacitance across the line.

    Why is the DC rating higher than the AC rating?
    The AC rating is an RMS value, so the peak of the sine is 1.41 times higher. The DC rating is set at that peak plus margin, which is why a 130 Vac part is rated 170 Vdc.

    What happens at end of life?
    A varistor that absorbs more than its rating drifts low in voltage and eventually fails short. That is why a fuse or a thermal element is placed in series with it on mains inputs.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products