Eaton MOVGT20V145K Coordinated MOV + GDT, 1020 V
Eaton MOVGT20V145K Coordinated MOV + GDT, 1020 V

Eaton MOVGT20V145K Coordinated MOV + GDT, 1020 V

Share
MOVGT20V145K: integrated MOV / GDT device, 1020 V clamp, 5 pF, 140 J.
    • Product Details
    • Download

    Eaton MOVGT20V145K Coordinated MOV + GDT, 1020 V

    MOVGT20V145K at a glance: integrated MOV / GDT device, 1020 V clamp, 5 pF, 140 J.

    Electrical Specifications

    ParameterValue
    Orderable part numberMOVGT20V145K
    UL volts130 Vac
    Recommended MCOV145 Vac
    UL MCOV170 Vac
    MOV voltage at 1 mA200(180~220) V
    GDT voltage at 100 V/s350(280~420) V
    Platform voltage at 1000 V/usmax. 350 V
    Peak voltage at 1000 V/usmax. 1020 V
    Withstand count at 2 kV / 1 kA40 shots
    MOV withstand current, 8/20 us10000 A
    Maximum energy, 10/1000 us140 J
    Capacitance at 1 kHz5 pF
    Package20 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +105 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1161

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    Reading the Data Sheet

    This is a mains-input protector, not a board-level one. It is chosen for the first stage ahead of a differential filter, and its platform voltage is what the downstream 1 kV-rated parts have to survive.

    The MOV inside is a 200(180~220) V part and the GDT is a 350(280~420) V tube. In series the pair holds the surge at the platform voltage of 350 V, well under the peak 1020 V it would reach alone at a 1000 V/us edge.

    Withstand is quoted as 40 shots at 2 kV / 1 kA. Because the GDT carries the follow current, the MOV is not eroded by the long tail of the pulse the way a stand-alone varistor is.

    Within the MOVGT family this is item 132 of 160 in the Eaton catalogue.

    Where This Series Fits

    The series combination goes across the input at the first stage, ahead of the filter, with the GDT on the line side. Both devices carry the surge current, so the trace between them has to be as short and as wide as the incoming conductor.

    • The GDT will not extinguish at DC. On a DC input the follow current keeps the tube conducting until the source is interrupted, so this part belongs on AC mains only.
    • The MOV inside is a disc, so the energy rating follows the disc diameter; the GDT adds current capability, not joules.

    Frequently Asked Questions

    Does the GDT need a separate fuse?
    The follow current is limited by the source impedance and the upstream fuse. Check that the fuse clears the follow current, otherwise the tube keeps conducting after the surge.

    Is the capacitance low enough for a signal line?
    A few picofarads, yes, but this is a mains protector. Its package and its platform voltage are chosen for an input stage, not for a data pair.

    Why put a GDT in series with a MOV?
    The MOV triggers fast and the GDT clamps low. In series the MOV starts the conduction and the GDT carries the current, so the residual voltage is closer to the GDT arc voltage than to the MOV clamp.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products