Eaton MOVHE07V230 Metal Oxide Varistor 360 V
Eaton MOVHE07V230 Metal Oxide Varistor 360 V

Eaton MOVHE07V230 Metal Oxide Varistor 360 V

Share
MOVHE07V230: radial leaded metal oxide varistor, 360 V varistor voltage, 300 V working, 595 V clamp, 140 pF, 32 J.
    • Product Details
    • Download

    Eaton MOVHE07V230 Metal Oxide Varistor 360 V

    MOVHE07V230 at a glance: radial leaded metal oxide varistor, 360 V varistor voltage, 300 V working, 595 V clamp, 140 pF, 32 J.

    Specification Table

    ParameterValue
    Orderable part numberMOVHE07V230
    Varistor voltage at 1 mA360 V
    Maximum continuous AC voltage230 Vrms
    Maximum continuous DC voltage300 Vdc
    Clamping voltage595 V
    Clamping current10 A
    Maximum surge current, 8/20 us1750 A
    Rated power0.25 W
    Typical capacitance at 1 kHz140 pF
    Maximum energy, 10/1000 us32 J
    Maximum body diameter4.5 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package7 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    The Figures Explained

    For AC mains service the continuous rating is given as an RMS voltage, and the DC rating is that value multiplied by roughly 1.41. Sizing the part at or near the nominal line voltage leaves no room for regulation tolerance or a prolonged overvoltage, so the usual rule is 10 to 20 percent headroom.

    The clamp column works out at 1.65 times the varistor voltage: 595 V at the rated current against 360 V at 1 mA. That ratio is what the downstream part has to survive, not the 360 V figure on the label.

    The disc absorbs 32 J in a 10/1000 us pulse and carries 1750 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 0.25 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 140 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 7 of 71 in the Eaton catalogue.

    Where This Series Fits

    The varistor sits across the input after the fuse and before the rectifier, with short, thick traces or a direct lead-to-terminal connection. A long return path turns the trace inductance into a voltage spike that the varistor cannot clamp.

    • The energy rating is for a single 10/1000 microsecond pulse. Repeated surges add up, and a part that absorbs its full rating once will not do it twice without a voltage shift.
    • The derating curve starts at 85 °C for most discs: above that the rated power falls linearly to zero at the maximum temperature.

    Frequently Asked Questions

    Are these parts UL recognised?
    Yes, the data sheet lists cURus to UL 1449 and TUV. The file numbers are on the agency page of the data sheet, and they cover the whole family.

    How do I size the disc diameter?
    From the energy, not the current. Estimate the joule content of the surge your source can deliver, add margin for repeated events, and pick the smallest disc that covers it; a larger disc also raises the capacitance across the line.

    Why is the DC rating higher than the AC rating?
    The AC rating is an RMS value, so the peak of the sine is 1.41 times higher. The DC rating is set at that peak plus margin, which is why a 130 Vac part is rated 170 Vdc.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products