Eaton MOVHE07V320 Metal Oxide Varistor 510 V
Eaton MOVHE07V320 Metal Oxide Varistor 510 V

Eaton MOVHE07V320 Metal Oxide Varistor 510 V

Share
MOVHE07V320: radial leaded metal oxide varistor, 510 V varistor voltage, 415 V working, 845 V clamp, 100 pF, 45 J.
    • Product Details
    • Download

    Eaton MOVHE07V320 Metal Oxide Varistor 510 V

    MOVHE07V320 at a glance: radial leaded metal oxide varistor, 510 V varistor voltage, 415 V working, 845 V clamp, 100 pF, 45 J.

    Electrical Specifications

    ParameterValue
    Orderable part numberMOVHE07V320
    Varistor voltage at 1 mA510 V
    Maximum continuous AC voltage320 Vrms
    Maximum continuous DC voltage415 Vdc
    Clamping voltage845 V
    Clamping current10 A
    Maximum surge current, 8/20 us1750 A
    Rated power0.25 W
    Typical capacitance at 1 kHz100 pF
    Maximum energy, 10/1000 us45 J
    Maximum body diameter5.5 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package7 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    Reading the Data Sheet

    The disc is a sintered zinc oxide body with a silver electrode on each face and two tinned leads. Energy absorption scales with the volume of the body, which is why a 20 mm part takes several times the joule rating of a 7 mm part at the same varistor voltage.

    The clamp column works out at 1.66 times the varistor voltage: 845 V at the rated current against 510 V at 1 mA. That ratio is what the downstream part has to survive, not the 510 V figure on the label.

    The disc absorbs 45 J in a 10/1000 us pulse and carries 1750 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 0.25 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 100 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 11 of 71 in the Eaton catalogue.

    Positioning in the Range

    Mount it with the body clear of the transformer and the bridge rectifier; a disc running at its rated power needs air, and the derating curve assumes it gets some.

    • The clamping voltage is quoted at a test current that is far below the surge. At the full 8/20 rating the residual voltage is higher – read the V-I curve.
    • The epoxy coating is the insulation, so the lead bend radius and the mounting clip both matter: a cracked coating at the lead exit is a failure point.

    Frequently Asked Questions

    What is the rated power for?
    It is the continuous dissipation the disc can take at 85 °C ambient. It matters when the varistor sits at a voltage close to its knee, not during the surge.

    Are these parts UL recognised?
    Yes, the data sheet lists cURus to UL 1449 and TUV. The file numbers are on the agency page of the data sheet, and they cover the whole family.

    How do I size the disc diameter?
    From the energy, not the current. Estimate the joule content of the surge your source can deliver, add margin for repeated events, and pick the smallest disc that covers it; a larger disc also raises the capacitance across the line.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message