Eaton MOVHE14V385 MOV Disc Varistor 14 mm
Eaton MOVHE14V385 MOV Disc Varistor 14 mm

Eaton MOVHE14V385 MOV Disc Varistor 14 mm

Share
MOVHE14V385: radial leaded metal oxide varistor, 620 V varistor voltage, 505 V working, 1025 V clamp, 320 pF, 190 J.
    • Product Details
    • Download

    Eaton MOVHE14V385 MOV Disc Varistor 14 mm

    MOVHE14V385 at a glance: radial leaded metal oxide varistor, 620 V varistor voltage, 505 V working, 1025 V clamp, 320 pF, 190 J.

    Electrical Specifications

    ParameterValue
    Orderable part numberMOVHE14V385
    Varistor voltage at 1 mA620 V
    Maximum continuous AC voltage385 Vrms
    Maximum continuous DC voltage505 Vdc
    Clamping voltage1025 V
    Clamping current50 A
    Maximum surge current, 8/20 us6000 A
    Rated power0.6 W
    Typical capacitance at 1 kHz320 pF
    Maximum energy, 10/1000 us190 J
    Maximum body diameter6.5 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package14 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    The Figures Explained

    The disc is a sintered zinc oxide body with a silver electrode on each face and two tinned leads. Energy absorption scales with the volume of the body, which is why a 20 mm part takes several times the joule rating of a 7 mm part at the same varistor voltage.

    The clamp column works out at 1.65 times the varistor voltage: 1025 V at the rated current against 620 V at 1 mA. That ratio is what the downstream part has to survive, not the 620 V figure on the label.

    The disc absorbs 190 J in a 10/1000 us pulse and carries 6000 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 0.6 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 320 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 46 of 71 in the Eaton catalogue.

    Series Positioning

    Mount it with the body clear of the transformer and the bridge rectifier; a disc running at its rated power needs air, and the derating curve assumes it gets some.

    • A varistor that has failed short looks like a low-value resistor across the line. Always pair a mains varistor with a fuse or a thermal element.
    • Disc diameter sets both the energy and the lead spacing. A 20 mm part needs a 7.5 mm hole pitch, so the footprint decision comes before the electrical one.

    Frequently Asked Questions

    What is the rated power for?
    It is the continuous dissipation the disc can take at 85 °C ambient. It matters when the varistor sits at a voltage close to its knee, not during the surge.

    Are these parts UL recognised?
    Yes, the data sheet lists cURus to UL 1449 and TUV. The file numbers are on the agency page of the data sheet, and they cover the whole family.

    How do I size the disc diameter?
    From the energy, not the current. Estimate the joule content of the surge your source can deliver, add margin for repeated events, and pick the smallest disc that covers it; a larger disc also raises the capacitance across the line.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products