Eaton MOVHE14V510 510 Vac Radial Varistor
Eaton MOVHE14V510 510 Vac Radial Varistor

Eaton MOVHE14V510 510 Vac Radial Varistor

Share
MOVHE14V510: radial leaded metal oxide varistor, 820 V varistor voltage, 670 V working, 1355 V clamp, 240 pF, 235 J.
    • Product Details
    • Download

    Eaton MOVHE14V510 510 Vac Radial Varistor

    MOVHE14V510 at a glance: radial leaded metal oxide varistor, 820 V varistor voltage, 670 V working, 1355 V clamp, 240 pF, 235 J.

    Key Specifications

    ParameterValue
    Orderable part numberMOVHE14V510
    Varistor voltage at 1 mA820 V
    Maximum continuous AC voltage510 Vrms
    Maximum continuous DC voltage670 Vdc
    Clamping voltage1355 V
    Clamping current50 A
    Maximum surge current, 8/20 us6000 A
    Rated power0.6 W
    Typical capacitance at 1 kHz240 pF
    Maximum energy, 10/1000 us235 J
    Maximum body diameter7 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package14 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    Reading the Data Sheet

    This is a single-shot device in the sense that the joule rating is quoted for one pulse. A surge protector built around a disc survives because the pulses are rare, not because the part is unlimited; the derating curve states how many.

    The clamp column works out at 1.65 times the varistor voltage: 1355 V at the rated current against 820 V at 1 mA. That ratio is what the downstream part has to survive, not the 820 V figure on the label.

    The disc absorbs 235 J in a 10/1000 us pulse and carries 6000 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 0.6 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 240 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 49 of 71 in the Eaton catalogue.

    Positioning in the Range

    Keep the leads short and do not sleeve them together: the loop area between the two leads is part of the clamping path, and folding them against each other is what keeps the inductance low.

    • Do not put a varistor across a DC bus without checking the follow current: at DC there is no zero crossing to extinguish it, and the disc can overheat after the surge has passed.
    • The marking on the body gives the part number and the varistor voltage. In a service situation that marking is how the failed part gets identified.

    Frequently Asked Questions

    What is the rated power for?
    It is the continuous dissipation the disc can take at 85 °C ambient. It matters when the varistor sits at a voltage close to its knee, not during the surge.

    Are these parts UL recognised?
    Yes, the data sheet lists cURus to UL 1449 and TUV. The file numbers are on the agency page of the data sheet, and they cover the whole family.

    How do I size the disc diameter?
    From the energy, not the current. Estimate the joule content of the surge your source can deliver, add margin for repeated events, and pick the smallest disc that covers it; a larger disc also raises the capacitance across the line.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products