Eaton MOVS2825V025 SMT Varistor, 150 A Peak
Eaton MOVS2825V025 SMT Varistor, 150 A Peak

Eaton MOVS2825V025 SMT Varistor, 150 A Peak

Share
MOVS2825V025: surface mount metal oxide varistor, 35.1-42.9 V varistor voltage, 31 V working, 80 V clamp, 550 pF, 0.9 J.
    • Product Details
    • Download

    Eaton MOVS2825V025 SMT Varistor, 150 A Peak

    MOVS2825V025 at a glance: surface mount metal oxide varistor, 35.1-42.9 V varistor voltage, 31 V working, 80 V clamp, 550 pF, 0.9 J.

    Key Specifications

    ParameterValue
    Orderable part numberMOVS2825V025
    Working voltage, RMS25 Vrms
    Working voltage, DC31 Vdc
    Varistor voltage at 1 mA35.1-42.9 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us80 V
    Peak current, 8/20 us150 A
    Maximum energy, 10/1000 us0.9 J
    Rated power0.01 W
    Typical capacitance at 1 kHz550 pF
    Component thickness4.2 mm
    Package2825
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1005

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    Reading the Data Sheet

    Selection follows the same chain as a radial part: continuous voltage first, then varistor voltage, then the energy the transient actually delivers. The clamp column tells you what the downstream circuit sees at the rated current.

    The clamp column works out at 2.28 times the varistor voltage: 80 V at the rated current against 35.1~42.9 V at 1 mA. That ratio is what the downstream part has to survive, not the 35.1~42.9 V figure on the label.

    Standing at 31 V the leakage is at most 50 uA, which is 1.55 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 4.2 mm tall this is the part that has to fit under the enclosure. The 0.9 J rating and the 150 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS2825 family this is item 5 of 27 in the Eaton catalogue.

    Where This Series Fits

    Place the chip directly across the connector pins with the ground return on the same layer. The part protects what is between its own terminals, so a shared ground path back to the connector defeats it.

    • The chip has no lead frame to spread heat, so the rated power assumes the recommended pad. A reduced pad raises the body temperature at the same continuous current.
    • Reflow profile and pad geometry are in the data sheet; the part is not sensitive to moisture at the levels of a plastic package, but the solder joint is the thermal path.

    Frequently Asked Questions

    What is the operating temperature range?
    The table states it for each family; the upper limit is the point where the rated power falls to zero, not the point where the part stops working.

    Is the part halogen free?
    Yes, the data sheet states halogen free and RoHS compliance without exemptions for the whole family.

    Is the SMD part a drop-in for a radial disc?
    Electrically it can be, at the same varistor voltage and energy. Mechanically it is not: the footprint, the height and the thermal path all change, and the SMD body has less mass to absorb the same pulse.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products