Eaton MOVS2825V095 SMD Metal Oxide Varistor 260 V
Eaton MOVS2825V095 SMD Metal Oxide Varistor 260 V

Eaton MOVS2825V095 SMD Metal Oxide Varistor 260 V

Share
MOVS2825V095: surface mount metal oxide varistor, 135-165 V varistor voltage, 127 V working, 260 V clamp, 175 pF, 4.1 J.
    • Product Details
    • Download

    Eaton MOVS2825V095 SMD Metal Oxide Varistor 260 V

    MOVS2825V095 at a glance: surface mount metal oxide varistor, 135-165 V varistor voltage, 127 V working, 260 V clamp, 175 pF, 4.1 J.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMOVS2825V095
    Working voltage, RMS95 Vrms
    Working voltage, DC127 Vdc
    Varistor voltage at 1 mA135-165 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us260 V
    Peak current, 8/20 us400 A
    Maximum energy, 10/1000 us4.1 J
    Rated power0.1 W
    Typical capacitance at 1 kHz175 pF
    Component thickness4.2 mm
    Package2825
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1005

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    How to Read These Ratings

    The chip is terminated with a silver-plated nickel barrier, so the solder joint is also the thermal path into the board. A generous pad is not cosmetic: it is what keeps the body temperature down at the continuous rating.

    The clamp column works out at 1.93 times the varistor voltage: 260 V at the rated current against 135~165 V at 1 mA. That ratio is what the downstream part has to survive, not the 135~165 V figure on the label.

    Standing at 127 V the leakage is at most 50 uA, which is 6.35 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 4.2 mm tall this is the part that has to fit under the enclosure. The 4.1 J rating and the 400 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS2825 family this is item 12 of 27 in the Eaton catalogue.

    What This Family Is For

    Put it before the series ferrite or inductor, on the side that faces the cable. The order of the two components decides which one takes the surge.

    • The energy per unit volume is fixed by the body, so a lower profile in the same footprint always means less joule capability, not more.
    • Tape and reel orientation follows EIA, and the parts are supplied in the quantities the data sheet lists – worth checking before a production run.

    Frequently Asked Questions

    How much height does it add?
    The thickness column is the body height above the board, 3.2 mm for the low profile parts and up to 5.6 mm for the high voltage ones. That has to clear the enclosure before the part is designed in.

    Can it be reflow soldered?
    Yes, that is the point of the package. The recommended profile and pad geometry are in the data sheet, and the pad is also the thermal path, so a reduced pad raises the body temperature.

    What is the peak current rating for?
    It is the 8/20 microsecond single-shot current the body survives. The energy column is the better guide for a long pulse, because a 10/1000 microsecond waveform delivers far more joules at the same peak.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products