Eaton MOVS2825V195 SMD Varistor 195 Vac
Eaton MOVS2825V195 SMD Varistor 195 Vac

Eaton MOVS2825V195 SMD Varistor 195 Vac

Share
MOVS2825V195: surface mount metal oxide varistor, 270-330 V varistor voltage, 250 V working, 520 V clamp, 65 pF, 9 J.
    • Product Details
    • Download

    Eaton MOVS2825V195 SMD Varistor 195 Vac

    MOVS2825V195 at a glance: surface mount metal oxide varistor, 270-330 V varistor voltage, 250 V working, 520 V clamp, 65 pF, 9 J.

    Specification Table

    ParameterValue
    Orderable part numberMOVS2825V195
    Working voltage, RMS195 Vrms
    Working voltage, DC250 Vdc
    Varistor voltage at 1 mA270-330 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us520 V
    Peak current, 8/20 us400 A
    Maximum energy, 10/1000 us9 J
    Rated power0.1 W
    Typical capacitance at 1 kHz65 pF
    Component thickness4.2 mm
    Package2825
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1005

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    How to Read These Ratings

    These parts are used where the board is assembled reflow-only and a radial disc would need a second process. The penalty is thermal: the chip has less mass than a disc of the same diameter, so the joule rating per unit area is lower.

    The clamp column works out at 1.93 times the varistor voltage: 520 V at the rated current against 270~330 V at 1 mA. That ratio is what the downstream part has to survive, not the 270~330 V figure on the label.

    Standing at 250 V the leakage is at most 50 uA, which is 12.5 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 4.2 mm tall this is the part that has to fit under the enclosure. The 9 J rating and the 400 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS2825 family this is item 18 of 27 in the Eaton catalogue.

    Where This Series Fits

    Place the chip directly across the connector pins with the ground return on the same layer. The part protects what is between its own terminals, so a shared ground path back to the connector defeats it.

    • Reflow once. A second pass reflows the termination and can crack the ceramic at the silver-nickel barrier.
    • The termination is silver-nickel, so the parts are compatible with lead-free and tin-lead processes, but not with a second reflow at the same profile.

    Frequently Asked Questions

    What is the peak current rating for?
    It is the 8/20 microsecond single-shot current the body survives. The energy column is the better guide for a long pulse, because a 10/1000 microsecond waveform delivers far more joules at the same peak.

    Why is the capacitance so high?
    A 4032 body at 14 Vdc has a large electrode area and a thin dielectric, so the capacitance runs into thousands of picofarads. That is fine on a supply rail and not fine on a data line.

    Can two parts be paralleled for more energy?
    Only if they are matched, which they are not. The varistor voltage tolerance means one part takes most of the current, so the pair behaves like the weaker one plus a little.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products