
| Parameter | Value |
|---|---|
| Orderable part number | MOVS4032V014 |
| Working voltage, RMS | 14 Vrms |
| Working voltage, DC | 18 Vdc |
| Varistor voltage at 1 mA | 19.8-24.2 V |
| Leakage current at 0.8 Vv | max. 50 uA |
| Clamping voltage, 8/20 us | 48 V at 2.5 A |
| Peak current, 8/20 us | 250 A |
| Maximum energy, 10/1000 us | 1.1 J |
| Rated power | 0.02 W |
| Typical capacitance at 1 kHz | 2850 pF |
| Component thickness | 3.2 mm |
| Package | 4032 |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +85 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, halogen free |
| Data sheet | Eaton Technical Data ELX1004 |
Dimensions, recommended pad or hole pattern and the derating curves are
on the data sheet pages; the package line above gives the body size as Eaton states it.
These parts are used where the board is assembled reflow-only and a radial disc would need a second process. The penalty is thermal: the chip has less mass than a disc of the same diameter, so the joule rating per unit area is lower.
The clamp column works out at 2.42 times the varistor voltage: 48 V at the rated current against 19.8~24.2 V at 1 mA. That ratio is what the downstream part has to survive, not the 19.8~24.2 V figure on the label.
Standing at 18 V the leakage is at most 50 uA, which is 0.9 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.
At 3.2 mm tall this is the part that has to fit under the enclosure. The 1.1 J rating and the 250 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.
Within the MOVS4032 family this is item 2 of 30 in the Eaton catalogue.
Put it before the series ferrite or inductor, on the side that faces the cable. The order of the two components decides which one takes the surge.
What is the operating temperature range?
The table states it for each family; the upper limit is the point where the rated power falls to zero, not the point where the part stops working.
Is the part halogen free?
Yes, the data sheet states halogen free and RoHS compliance without exemptions for the whole family.
Is the SMD part a drop-in for a radial disc?
Electrically it can be, at the same varistor voltage and energy. Mechanically it is not: the footprint, the height and the thermal path all change, and the SMD body has less mass to absorb the same pulse.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd