Eaton MOVS4032V180 SMD Metal Oxide Varistor 455 V
Eaton MOVS4032V180 SMD Metal Oxide Varistor 455 V

Eaton MOVS4032V180 SMD Metal Oxide Varistor 455 V

Share
MOVS4032V180: surface mount metal oxide varistor, 255-311 V varistor voltage, 230 V working, 455 V clamp, 125 pF, 18 J.
    • Product Details
    • Download

    Eaton MOVS4032V180 SMD Metal Oxide Varistor 455 V

    MOVS4032V180 at a glance: surface mount metal oxide varistor, 255-311 V varistor voltage, 230 V working, 455 V clamp, 125 pF, 18 J.

    Electrical Specifications

    ParameterValue
    Orderable part numberMOVS4032V180
    Working voltage, RMS180 Vrms
    Working voltage, DC230 Vdc
    Varistor voltage at 1 mA255-311 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us455 V at 10 A
    Peak current, 8/20 us1200 A
    Maximum energy, 10/1000 us18 J
    Rated power0.25 W
    Typical capacitance at 1 kHz125 pF
    Component thickness4.2 mm
    Package4032
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1004

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    The Figures Explained

    Selection follows the same chain as a radial part: continuous voltage first, then varistor voltage, then the energy the transient actually delivers. The clamp column tells you what the downstream circuit sees at the rated current.

    The clamp column works out at 1.78 times the varistor voltage: 455 V at the rated current against 255~311 V at 1 mA. That ratio is what the downstream part has to survive, not the 255~311 V figure on the label.

    Standing at 230 V the leakage is at most 50 uA, which is 11.5 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 4.2 mm tall this is the part that has to fit under the enclosure. The 18 J rating and the 1200 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS4032 family this is item 17 of 30 in the Eaton catalogue.

    Where This Series Fits

    Place the chip directly across the connector pins with the ground return on the same layer. The part protects what is between its own terminals, so a shared ground path back to the connector defeats it.

    • Reflow once. A second pass reflows the termination and can crack the ceramic at the silver-nickel barrier.
    • The 2825 and 4032 bodies are thick enough that the pick-and-place nozzle needs the right tip; a standard 0402 nozzle will not hold them.

    Frequently Asked Questions

    What is the operating temperature range?
    The table states it for each family; the upper limit is the point where the rated power falls to zero, not the point where the part stops working.

    Is the part halogen free?
    Yes, the data sheet states halogen free and RoHS compliance without exemptions for the whole family.

    Is the SMD part a drop-in for a radial disc?
    Electrically it can be, at the same varistor voltage and energy. Mechanically it is not: the footprint, the height and the thermal path all change, and the SMD body has less mass to absorb the same pulse.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products