
| Parameter | Value |
|---|---|
| Orderable part number | MOVS4032V460 |
| Working voltage, RMS | 460 Vrms |
| Working voltage, DC | 615 Vdc |
| Varistor voltage at 1 mA | 675-825 V |
| Leakage current at 0.8 Vv | max. 50 uA |
| Clamping voltage, 8/20 us | 1240 V at 10 A |
| Peak current, 8/20 us | 1200 A |
| Maximum energy, 10/1000 us | 65 J |
| Rated power | 0.25 W |
| Typical capacitance at 1 kHz | 65 pF |
| Component thickness | 5.6 mm |
| Package | 4032 |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +85 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, halogen free |
| Data sheet | Eaton Technical Data ELX1004 |
Dimensions, recommended pad or hole pattern and the derating curves are
on the data sheet pages; the package line above gives the body size as Eaton states it.
The thickness column is the one that gets overlooked. A 4032 varistor is a 3.2 mm to 5.6 mm tall block, and that height has to clear the enclosure or the board-to-board gap before the part is designed in.
The clamp column works out at 1.84 times the varistor voltage: 1240 V at the rated current against 675~825 V at 1 mA. That ratio is what the downstream part has to survive, not the 675~825 V figure on the label.
Standing at 615 V the leakage is at most 50 uA, which is 30.75 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.
At 5.6 mm tall this is the part that has to fit under the enclosure. The 65 J rating and the 1200 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.
Within the MOVS4032 family this is item 28 of 30 in the Eaton catalogue.
Place the chip directly across the connector pins with the ground return on the same layer. The part protects what is between its own terminals, so a shared ground path back to the connector defeats it.
Why is the capacitance so high?
A 4032 body at 14 Vdc has a large electrode area and a thin dielectric, so the capacitance runs into thousands of picofarads. That is fine on a supply rail and not fine on a data line.
Can two parts be paralleled for more energy?
Only if they are matched, which they are not. The varistor voltage tolerance means one part takes most of the current, so the pair behaves like the weaker one plus a little.
What is the operating temperature range?
The table states it for each family; the upper limit is the point where the rated power falls to zero, not the point where the part stops working.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd