Eaton MPI5451R1-100-R 10 uH AEC-Q200 Inductor 290 mOhm
Eaton MPI5451R1-100-R 10 uH AEC-Q200 Inductor 290 mOhm

Eaton MPI5451R1-100-R 10 uH AEC-Q200 Inductor 290 mOhm

Share
MPI5451R1-100-R: automotive power inductor, 10 uH ±15%, 1.3 A Irms, Isat 2.5 A, DCR 290 mOhm.
    • Product Details
    • Download

    Eaton MPI5451R1-100-R 10 uH AEC-Q200 Inductor 290 mOhm

    MPI5451R1-100-R at a glance: automotive power inductor, 10 uH ±15%, 1.3 A Irms, Isat 2.5 A, DCR 290 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMPI5451R1-100-R
    Inductance10 uH ±15%
    DCR typical @ +20 °C290 mOhm
    Irms (DC, 40 °C rise)1.3 A
    Isat2.5 A
    K-factor199
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10247

    Dimensions and Pad Layout

    MPI5451R1-100-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10247: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a surface-mount power inductor with a distributed-gap core. The energy is stored through the volume of the magnetic material rather than a single gap, which produces the gradual rolloff and keeps the fringing field small.

    At 1.3 A the winding dissipates about 0.49 W in copper using the typical DCR of 290 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 31.2 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 199 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPI5451R1 family this is value 10 of 11, in a range from 0.33 uH to 15 uH.

    Series Positioning

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: handheld/mobile devices; portable media players; mp3 players; battery operated devices; notebook/netbook.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    What is the difference between Irms and Isat?
    Irms is the DC current for the rated temperature rise; Isat is the peak current at a defined inductance rolloff. A converter can exceed Irms briefly but must stay inside Isat.

    Why two DCR columns?
    Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.

    Why two DCR columns?
    Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products