Eaton MPI5451R3-3R3-R 3.3 uH Inductor, Isat 3.7 A
Eaton MPI5451R3-3R3-R 3.3 uH Inductor, Isat 3.7 A

Eaton MPI5451R3-3R3-R 3.3 uH Inductor, Isat 3.7 A

Share
MPI5451R3-3R3-R: automotive power inductor, 3.3 uH , 1 A Irms, Isat 3.7 A, DCR 4.2 mOhm.
    • Product Details
    • Download

    Eaton MPI5451R3-3R3-R 3.3 uH Inductor, Isat 3.7 A

    MPI5451R3-3R3-R at a glance: automotive power inductor, 3.3 uH , 1 A Irms, Isat 3.7 A, DCR 4.2 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMPI5451R3-3R3-R
    Inductance3.3 uH
    DCR typical @ +20 °C4.2 mOhm
    Irms (DC, 40 °C rise)1 A
    Isat3.7 A
    K-factor33
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10247

    Mechanical Dimensions & Pad Layout

    MPI5451R3-3R3-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10247: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    Power inductors in this family are chosen on three numbers: inductance for ripple, saturation current for the transient, and DCR for loss. The data sheet row gives all three against defined test conditions.

    At 1 A the winding dissipates about 0.004 W in copper using the typical DCR of 4.2 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 22.6 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 33 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPI5451R3 family this is value 6 of 9, in a range from 0.47 uH to 10 uH.

    Series Positioning

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: handheld/mobile devices; portable media players; mp3 players; battery operated devices; notebook/netbook.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    Why two DCR columns?
    Typical and maximum. A guaranteed thermal design uses the maximum; a nominal efficiency calculation can use the typical.

    What is the difference between Irms and Isat?
    Irms is the DC current for the rated temperature rise; Isat is the peak current at a defined inductance rolloff. A converter can exceed Irms briefly but must stay inside Isat.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products