Eaton MPIA2512V3-3R3-R 3.3 uH Shielded Power Inductor
Eaton MPIA2512V3-3R3-R 3.3 uH Shielded Power Inductor

Eaton MPIA2512V3-3R3-R 3.3 uH Shielded Power Inductor

Share
MPIA2512V3-3R3-R: automotive power inductor, 3.3 uH , 1.8 A Irms, Isat 2.8 A, DCR 110 mOhm.
    • Product Details
    • Download

    Eaton MPIA2512V3-3R3-R 3.3 uH Shielded Power Inductor

    MPIA2512V3-3R3-R at a glance: automotive power inductor, 3.3 uH , 1.8 A Irms, Isat 2.8 A, DCR 110 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMPIA2512V3-3R3-R
    Inductance3.3 uH
    FLL minimum (at Isat)1.85 uH
    DCR typical @ +20 °C110 mOhm
    DCR maximum @ +20 °C135 mOhm
    Irms (DC, 40 °C rise)1.8 A
    Isat2.8 A
    SRF typical35 MHz
    K-factor2354
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1487

    Mechanical Drawing

    MPIA2512V3-3R3-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1487: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The part is built for automotive DC-DC stages: AEC-Q200 qualified, shielded, and characterised with both typical and maximum DCR so the loss budget can be built on either figure.

    At 1.8 A the winding dissipates about 0.356 W in copper using the typical DCR of 110 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 12.9 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 35 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    The K-factor of 2354 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPIA2512V3 family this is value 7 of 8, in a range from 0.33 uH to 4.7 uH.

    Positioning in the Range

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: body electronics; central body control module; vehicle access control system; headlamps, tail lamps and interior lighting and led lighting; doors, window lift and seat control.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    How much inductance is left at rated current?
    The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products