Eaton MPIA4020V3-220-R 22 uH AEC-Q200 Inductor 350 mOhm
Eaton MPIA4020V3-220-R 22 uH AEC-Q200 Inductor 350 mOhm

Eaton MPIA4020V3-220-R 22 uH AEC-Q200 Inductor 350 mOhm

Share
MPIA4020V3-220-R: automotive power inductor, 22 uH , 1.43 A Irms, Isat 1.65 A, DCR 350 mOhm.
    • Product Details
    • Download

    Eaton MPIA4020V3-220-R 22 uH AEC-Q200 Inductor 350 mOhm

    MPIA4020V3-220-R at a glance: automotive power inductor, 22 uH , 1.43 A Irms, Isat 1.65 A, DCR 350 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMPIA4020V3-220-R
    Inductance22 uH
    FLL minimum (at Isat)12.3 uH
    DCR typical @ +20 °C350 mOhm
    DCR maximum @ +20 °C402 mOhm
    Irms (DC, 40 °C rise)1.43 A
    Isat1.65 A
    SRF typical12 MHz
    K-factor525
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1486

    Mechanical Drawing

    MPIA4020V3-220-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1486: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    The part is built for automotive DC-DC stages: AEC-Q200 qualified, shielded, and characterised with both typical and maximum DCR so the loss budget can be built on either figure.

    At 1.43 A the winding dissipates about 0.716 W in copper using the typical DCR of 350 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 29.9 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 12 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    The K-factor of 525 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPIA4020V3 family this is value 16 of 16, in a range from 0.1 uH to 22 uH.

    Where This Series Fits

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: body electronics; central body control module; vehicle access control system; headlamps, tail lamps and interior lighting and led lighting; doors, window lift and seat control.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    How much inductance is left at rated current?
    The FLL column gives the inductance at saturation current. Ripple at full load should be calculated with FLL.

    What is the difference between Irms and Isat?
    Irms is the DC current for the rated temperature rise; Isat is the peak current at a defined inductance rolloff. A converter can exceed Irms briefly but must stay inside Isat.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products