Eaton MTA3V3822H-R82-R 0.82 uH AEC-Q200 THT Inductor
Eaton MTA3V3822H-R82-R 0.82 uH AEC-Q200 THT Inductor

Eaton MTA3V3822H-R82-R 0.82 uH AEC-Q200 THT Inductor

Share
MTA3V3822H-R82-R: molded through-hole power inductor, 0.82 uH , 153 A Irms, Isat 440 A, DCR 0.16 mOhm.
    • Product Details
    • Download

    Eaton MTA3V3822H-R82-R 0.82 uH AEC-Q200 THT Inductor

    MTA3V3822H-R82-R at a glance: molded through-hole power inductor, 0.82 uH , 153 A Irms, Isat 440 A, DCR 0.16 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMTA3V3822H-R82-R
    Inductance0.82 uH
    FLL minimum (at Isat)0.46 uH
    DCR typical @ +20 °C0.16 mOhm
    DCR maximum @ +20 °C0.18 mOhm
    Irms (DC, 40 °C rise)153 A
    Isat440 A
    SRF typical38.8 MHz
    K-factor18.2
    MountingThrough-hole
    Operating temperature-55 °C to +155 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1530

    Outline Drawing

    MTA3V3822H-R82-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1530: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A molded through-hole power inductor: the winding is pressed into a magnetic body with leads formed for plated holes. The molding contains the field and the leads carry heat into the board, which is how this family reaches high current in a small volume.

    At 153 A the winding dissipates about 3.75 W in copper using the typical DCR of 0.16 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 79376 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 38.8 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    The K-factor of 18.2 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MTA3V3822H family this is value 1 of 3, in a range from 0.82 uH to 3.3 uH.

    What This Family Is For

    The MTA family is the molded through-hole high-current range: AEC-Q200 qualified, with two Irms and two Isat columns for thermal and transient checks.

    • Through-hole joints carry the full current. Check the solder joint and barrel against the rating, not just the body.
    • Typical applications: digital instrument cluster; electronic stability control system (esc); engine and powertrain systems; electric pumps, motor control and auxiliaries; powertrain control unit (pcu)/engine control unit (ecu).
    • Design note: check the joint temperature in the thermal test, not the body temperature.

    Frequently Asked Questions

    Why through-hole for this current level?
    The leads carry heat into the board copper and the body is not limited by reflow standoff, which is how the part reaches its current rating.

    Is the body shielded?
    The molding encloses the winding, so the external field is small.

    What is the SRF column for?
    It marks where the winding capacitance takes over. Keep the switching frequency and its harmonics below it.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message